Before Using the Bedwetting Alarm
• Carefully remove all packaging materials and keep the enclosed documents
in a safe place.
• Keep the packaging, product, and its components out of reach of children.
• Check the product is intact. DO NOT use if broken.
• Charge the Receiver and Urine Detection Sensor & Transmitter using the
provided Charging/Storage Case and USB Cable.
• Always check the battery to ensure that the alarm is still working. This can
be checked by inserting a damp cloth in the middle of the clip.
• Allow the child familiarise themselves with the product before using at night,
so they are not frightened by the noise.
If any abnormalities are detected, please contact our service centre:
In Australia - 1800 807 464
In New Zealand - 0800 523 583
USAGE INSTRUCTIONS
1. Power On/Off switch: - Slide the switch to the Right to turn ON the receiver,- Slide the switch to the Left to turn OFF the receiver.
2. Select the mode you wish to use:
• Vibration Mode: - Icons light up sequentially, then locks on vibration mode automatically symbol will appear. - Press the OK button to confirm.
• Sound Mode: - Press the SET button 3 times the screen - Press the OK button to confirm. symbol will appear.
• Vibration + Sound Mode: - Press the SET button 4 times, the screen symbols will appear.- Press the OK button to confirm. 3. Urine Detection Sensor & Transmitter:
• Open and attach the Urine Detection Sensor & Transmitter Back Clip to the front of the underwear or pyjamas, positioning it where urine is most likely detected.
Alarm Response:
• When the first sign of moisture is detected, the symbol appears on the screen along with the sound and/or vibration symbol/s depending on the alarm mode set.
• The alarm will sound and/or vibrate to wake the child.
• Press any button to cancel the alarm.
• The alarm symbol will disappear and return to normal mode.
• After the alarm has sounded and/or vibrated and the child wakes up (they may need assistance):- Unclip the Urine Detection Sensor & Transmitter from the child's underwear/pyjamas. - The child should then go to the toilet and finish emptying their bladder.
• Immediately clean and dry the Urine Detection Sensor & Transmitter (to avoid corrosion)
• Re-attach the Urine Detection Sensor & Transmitter using the Back Clip to the child's clean dry underwear or pyjamas.
USAGE ADVICE
Using the Bedwetting Alarm
1. Power On/Off switch:
- Slide the switch to the Right to turn ON the receiver,
- Slide the switch to the Left to turn OFF the receiver.
2. Select the mode you wish to use:
• Vibration Mode:
- Icons light up sequentially, then locks on vibration mode automatically
symbol will appear.
- Press the OK button to confirm.
• Sound Mode:
- Press the SET button 3 times the screen symbol will appear.
- Press the OK button to confirm.
• Vibration + Sound Mode:
- Press the SET button 4 times, the screen symbols
will appear.
- Press the OK button to confirm.
3. Urine Detection Sensor & Transmitter:
• Open and attach the Urine Detection Sensor & Transmitter Back Clip to the
front of the underwear or pyjamas, positioning it where urine is most likely
detected.
Alarm Response:
• When the first sign of moisture is detected, the symbol appears
on the screen along with the sound and/or vibration symbol/s
depending on the alarm mode set.
• The alarm will sound and/or vibrate to wake the child.
• Press any button to cancel the alarm.
• The alarm symbol will disappear and return to normal mode.
• After the alarm has sounded and/or vibrated and the child wakes up (they
may need assistance):
- Unclip the Urine Detection Sensor & Transmitter from the child's
underwear/pyjamas.
- The child should then go to the toilet and finish emptying their bladder.
• Immediately clean and dry the Urine Detection Sensor & Transmitter
(to avoid corrosion) as per Cleaning instructions on page 13.
• Re-attach the Urine Detection Sensor & Transmitter using the Back Clip
to the child's clean dry underwear or pyjamas.
Helpful Hints
• Remind the child each night that when the alarm triggers and their
underwear is wet they need to stop 'weeing' and go to the toilet.
• Leave a night light on in case the child is frightened when the alarm goes
off. This will also help them navigate safely to the toilet in the dark.
• Make sure you are close enough to the child's room to be able to hear the
alarm and help them as needed.
• Keep a spare set of sheets, underwear and pyjamas close by.
• The program may be slow and frustrating, but always remember to offer
encouragement and give praise when the child has a dry night. Do not scold
the child if they wet the bed.
• Restricting intake of liquids before bedtime does not help treat bedwetting.
It is important the child has enough to drink during the day.
• Drinks containing caffeine should be avoided.
Progress Chart
• A progress chart and stickers have been included to help keep track of the
child's progress. Ask the child if they remember the alarm going off and
what they did.
• You can also introduce a reward scheme for positive behaviour to encourage
the child to want to succeed.
Completion of Training
• The child should continue to use the alarm until they have had 14
consecutive dry nights.
• It can take up to 12 weeks for a child to be fully dry at night without needing
the bedwetting alarm.
To reduce the chance of relapse, the process of "overlearning" can be
implemented. Ask your healthcare professional if the child should trial this
process before discontinuing the alarm. This process should not be used if
the child is on Desmopressin medication.
• The child should have a large drink each night in the hour before bed and
continue with alarm training, until a further 14 consecutive dry nights have
been achieved.
• When the child has reached 14 dry nights in a row using the over-learning
method, the alarm is no longer required, and the pre-bedtime drink can be
stopped.
• A relapse is when the child wets the bed two or more nights consecutively. If
relapse occurs, repeating alarm training will often produce a good response.
• If bedwetting persists after 3 to 6 months of alarm training, alternative
treatment options should be considered